Industrial 3D Scanning

See how industrial-grade 3D scanners are used for production inspection, first-article checks, quality control, and complex part measurement.

Cylinder Head Geometry Inspection: Adapting Handheld 3D Scanning to Cast Ports and Thin Walls

2026/07/20

Cylinder Head Geometry Inspection: Adapting Handheld 3D Scanning to Cast Ports and Thin Walls

Engine cylinder heads pack an extraordinary amount of functional geometry into a single casting. Intake and exhaust ports curve through the part, combustion cha
Closing the Loop on Pump Housing Quality with 3D Inspection

2026/07/19

Closing the Loop on Pump Housing Quality with 3D Inspection

When a centrifugal pump housing comes off the machining line, the quality team is rarely just checking a single dimension. They are verifying whether the volute
Hole Filling in 3D Scan Meshes

2026/07/19

Hole Filling in 3D Scan Meshes

Hole filling in 3D scan meshes is a polygonal mesh post processing operation that identifies and closes unintended gaps, voids, or missing polygon regions in raw scanned mesh data.
How to Scan 3D scanning for complex freeform surfaces Without Losing Inspection Detail

2026/07/19

How to Scan 3D scanning for complex freeform surfaces Without Losing Inspection Detail

The geometry of a turbine blade does not follow a straight line. Neither does a cast intake manifold, a stamped body panel, or a custom prosthetic socket. These
What a Coordinate Measuring Machine Can’t See: The Case for 3D Inspection of Mechanical Components

2026/07/18

What a Coordinate Measuring Machine Can’t See: The Case for 3D Inspection of Mechanical Components

A machined impeller sits on a granite surface plate. The quality engineer needs to verify blade profile tolerance, wall thickness distribution, and the concentr
From Black Plastic to Polished Steel: A Part-Centric Strategy for 3D Inspection of Industrial Parts

2026/07/18

From Black Plastic to Polished Steel: A Part-Centric Strategy for 3D Inspection of Industrial Parts

## Understanding the Part Before the First Scan: Materials, Coatings, and Geometric Complexity Industrial parts do not arrive at the inspection station with a n
Point Cloud Downsampling

2026/07/18

Point Cloud Downsampling

Point cloud downsampling (also referred to as point cloud simplification or sub sampling) is a 3D data processing technique that reduces the total number of points in a raw point cloud generated by 3D scanning systems, while preserving critical geometric, topological, and metrological properties of the scanned object.
What Traditional Inspection Methods Miss in Mold Corner Geometry

2026/07/18

What Traditional Inspection Methods Miss in Mold Corner Geometry

Mold corners that carry fine ribs, deep bosses, and narrow shut-off surfaces are the regions where dimensional error accumulates fastest—and where conventional
Closing the Gap: What 3D Inspection of Narrow Slots and Deep Cavities Actually Demands

2026/07/17

Closing the Gap: What 3D Inspection of Narrow Slots and Deep Cavities Actually Demands

When a turbine disk slot measures less than two millimeters across and the blueprint calls out a profile tolerance of 30 microns, an inspector’s options narrow
Datum Alignment in 3D Scanning

2026/07/17

Datum Alignment in 3D Scanning

Datum alignment in 3D scanning is the metrological process of transforming captured 3D point cloud or mesh data to align with a predefined, traceable datum reference frame (DRF) that conforms to engineering design, manufacturing, or inspection requirements.
The Hidden Geometry of Mold Cavities and Why Precision 3D Inspection Matters

2026/07/16

The Hidden Geometry of Mold Cavities and Why Precision 3D Inspection Matters

Mold cavities live in a strange space between design intent and physical reality. A cavity that measures perfectly on a CMM at one cross-section can still produ
Coordinate Systems in 3D Scanning

2026/07/16

Coordinate Systems in 3D Scanning

A coordinate system in 3D scanning is a standardized orthogonal reference frame used to assign unique numerical X, Y, and Z positions to every point captured during the scanning process.