Mesh hole filling and format restrictions in AlphaScan S1


Knowledge Overview Definition

For hole filling in AlphaScan S1, an externally imported mesh must be in PLY format; the manual states this restriction specifically for imported mesh data.

Imported-mesh restrictions and entering hole filling

For hole filling in AlphaScan S1, an externally imported mesh must be in PLY format; the manual states this restriction specifically for imported mesh data.

Select the mesh and open the hole-filling action to enter the hole-filling interface.

Selecting a hole and leaving hole-filling mode

Areas available for filling are shown in red; moving the pointer over such an area changes it to green, and clicking the green area fills that hole.

After hole filling, use the exit-hole-filling action on the left to leave this mode.

Further Reading All Entries
  1. What Is 3D Scanning? Principles, Workflow, and Industrial Applications 3D scanning is a digital measurement technology that converts the surface geometry of physical objects into 3D data. This entry covers its working principles, core parameters, industrial use cases, common misconceptions, and related technical…
  2. What Is a 3D Scanner? Types, Parameters, and Selection Criteria A 3D scanner captures three-dimensional surface data from physical objects and converts geometry, dimensions, and features into digital data for inspection, reverse engineering, and modeling.
  3. What Is 3D Scanning Accuracy? Accuracy, Repeatability, and Resolution Explained 3D scanning accuracy describes how closely scan data matches an object's actual geometry and dimensions. It is assessed through local accuracy, volumetric accuracy, stitching accuracy, repeatability, and resolution.
  4. What Is Point Cloud Data? Point Clouds, Meshes, and CAD Models in 3D Scanning Point cloud data is an important raw data format in 3D scanning. It consists of discrete 3D coordinate points that describe object surface geometry and support inspection, reverse engineering, modeling, and archiving.